NC.M3.F-IF.9Print or save as PDF
Comparing Functions in Different Forms
Sometimes one function comes as an equation and the other as a graph, a table or a sentence. You can't compare the forms directly, so you compare features: y-intercepts, zeros, maximums and minimums, rates of change, where each function increases, end behavior, and which is bigger. The method: find the same feature in each form, then put the two answers side by side.
Source: Authored for NCMath (not from the PDF prototype) — needs teacher review
The method
Find the same feature in each form, then compare
F-IF.9 gives you two functions in two different forms: an equation, a graph, a table, or a description in words. You can't compare an equation to a graph directly. You compare the features they share.
A feature is something every function has: a y-intercept, zeros, a maximum or minimum, a rate of change, where it increases, how it behaves at the ends. Each form hides these in a different place.
- Pick one feature the question asks about, such as the y-intercept.
- Find it for the first function, using that function's own form.
- Find the same feature for the second function, using its form.
- Put the two numbers side by side. Same feature, same units, same variable.
- Answer the exact question: which is greater, by how much, or on which x-values.
Example
f(x) = 2x + 5 is an equation. g is the graph of a line through (0, 3) and (2, 9). Which has the greater y-intercept?
Feature: y-intercept. For f, put in x = 0: f(0) = 5. For g, the graph crosses the y-axis at (0, 3), so the y-intercept is 3. Compare 5 and 3: f has the greater y-intercept.
Feature: y-intercept. For f, put in x = 0: f(0) = 5. For g, the graph crosses the y-axis at (0, 3), so the y-intercept is 3. Compare 5 and 3: f has the greater y-intercept.
Where to find each feature
Average rate of change on [a, b] — (f(b) − f(a)) ÷ (b − a)
| Feature | Equation | Graph | Table or words |
|---|---|---|---|
| y-intercept | Put in x = 0 | Where it crosses the y-axis | The x = 0 row, or the starting value |
| Zero | Solve f(x) = 0 | Where it meets the x-axis | An x whose output is 0, or when it lands or runs out |
| Maximum or minimum | Vertex of a parabola; midline ± amplitude for sine | Highest or lowest point | Biggest or smallest output, if the values turn around |
| Rate of change on [a, b] | Compute f(a) and f(b) | Read two points | Use the two rows |
| Increasing | Sign of the slope, or which side of the vertex | Climbing as you read left to right | Outputs rise as x rises |
| End behavior | Degree and sign of the leading coefficient, or the base | Where the ends point | Only a trend; words may tell you more |
Every row works for every pair of forms. Just use the right column for each function.
Example
f(x) = x². Table for g: x = 1, 3 gives g(1) = 2, g(3) = 8. Compare the average rate of change on [1, 3].
f: (f(3) − f(1)) ÷ 2 = (9 − 1) ÷ 2 = 4. g: (8 − 2) ÷ 2 = 3. f changes faster on [1, 3].
f: (f(3) − f(1)) ÷ 2 = (9 − 1) ÷ 2 = 4. g: (8 − 2) ÷ 2 = 3. f changes faster on [1, 3].
Equation vs. graph
Quadratic equation vs. quadratic graph
f is an equation, f(x) = x² − 2x − 3 (blue). g is only a graph (orange).
From the equation: f(0) = −3 is the y-intercept. Factoring, (x − 3)(x + 1) = 0, so the zeros are −1 and 3. The vertex is halfway between them at x = 1, and f(1) = −4. The parabola opens up, so −4 is a minimum.
From the graph: the y-intercept is 8, the zeros are −2 and 4, and the top point is (1, 9). It opens down, so 9 is a maximum.
| Feature | f (equation) | g (graph) |
|---|---|---|
| y-intercept | −3 | 8 |
| Zeros | −1 and 3 | −2 and 4 |
| Vertex | (1, −4), a minimum | (1, 9), a maximum |
| Increasing | x > 1 | x < 1 |
Example
Which function has the greater y-intercept? Which has zeros farther apart?
g's y-intercept is 8 and f's is −3, so g is greater. Distance between zeros: f has 3 − (−1) = 4, g has 4 − (−2) = 6. g's zeros are farther apart.
g's y-intercept is 8 and f's is −3, so g is greater. Distance between zeros: f has 3 − (−1) = 4, g has 4 − (−2) = 6. g's zeros are farther apart.
Trap: Both vertices sit at x = 1, but that doesn't make the functions alike. To compare maximums you compare heights. g has a maximum of 9. f opens up, so it has no maximum at all.
Line vs. absolute value
f(x) = −2x + 6 is an equation (blue). g is a graph of an absolute value V (orange).
f: the y-intercept is 6. Solving −2x + 6 = 0 gives the zero x = 3. The slope is −2, so f decreases everywhere and never has a maximum or minimum.
g: the y-intercept is −2, the zeros are −4 and 2, and the vertex (the minimum) is (−1, −3). It decreases for x < −1 and increases for x > −1.
The graphs cross where f(x) = g(x). On the right branch, g(x) = x − 2, so −2x + 6 = x − 2 gives x = 8/3. To the left of 8/3, f is greater. To the right, g is greater.
| Feature | f (equation) | g (graph) |
|---|---|---|
| y-intercept | 6 | −2 |
| Zeros | 3 | −4 and 2 |
| Minimum | none | −3 at x = −1 |
| Increasing | never | x > −1 |
| Rate of change on [0, 3] | −2 | 1 |
Example
Find g's average rate of change on [−1, 3] from the graph.
Read (−1, −3) and (3, 1). The rate is (1 − (−3)) ÷ (3 − (−1)) = 4 ÷ 4 = 1.
Read (−1, −3) and (3, 1). The rate is (1 − (−3)) ÷ (3 − (−1)) = 4 ÷ 4 = 1.
Trap: An average rate can hide a turn. On [−3, 1], g(−3) = −1 and g(1) = −1, so the average rate is 0. But g falls and then rises on that interval. Check the shape before you trust one number.
Sine equation vs. sine graph
From a maximum and minimum — midline = (max + min) ÷ 2, amplitude = (max − min) ÷ 2
f(x) = 2 sin x is an equation (blue). g is a graph (orange), shown from 0 to 2π.
From the equation: the maximum is 2, the minimum is −2, the midline is y = 0, the amplitude is 2, and the period is 2π.
From the graph: the highest point is 4 and the lowest is −2. It repeats twice between 0 and 2π, so the period is π.
From a graph's max and min you can build the midline and amplitude yourself.
| Feature | f (equation) | g (graph) |
|---|---|---|
| Maximum | 2 | 4 |
| Minimum | −2 | −2 |
| Midline | y = 0 | y = 1 |
| Amplitude | 2 | 3 |
| Period | 2π | π |
Example
Find g's midline and amplitude.
Midline: (4 + (−2)) ÷ 2 = 1. Amplitude: (4 − (−2)) ÷ 2 = 3.
Midline: (4 + (−2)) ÷ 2 = 1. Amplitude: (4 − (−2)) ÷ 2 = 3.
Trap: g is taller, but its minimum is not lower. Both have a minimum of −2, so they tie. A bigger amplitude doesn't mean a lower minimum when the midline has moved.
Equation vs. table or words
Two projectiles: equation vs. table
Projectile A is an equation: h(t) = −16t² + 64t, height in feet after t seconds. Projectile B is a table.
For A: it starts at h(0) = 0. The vertex is at t = 64 ÷ 32 = 2, and h(2) = 64. It lands when h = 0: −16t(t − 4) = 0, so at t = 4.
For B: the t = 0 row says it starts at 48 ft. The heights go 48, 64, 48, so the highest value is 64, and the table is symmetric around t = 1. It lands at t = 3, where the height is 0.
| t (seconds) | 0 | 1 | 2 | 3 |
|---|---|---|---|---|
| B height (ft) | 48 | 64 | 48 | 0 |
Example
Which projectile is in the air longer, and for how much longer?
A lands at t = 4 and B lands at t = 3. A is in the air 1 second longer.
A lands at t = 4 and B lands at t = 3. A is in the air 1 second longer.
Trap: Both projectiles reach a maximum of 64 ft, so they tie on height. They differ in when: A peaks at t = 2 and B peaks at t = 1. Compare the feature the question asks about, not the one that looks different.
Two savings plans: words vs. table
Plan A in words: start with $100 and add $30 every month. Its balance is 100, 130, 160, 190, 220 for months 0 to 4.
Plan B as a table (below). Each balance is 1.5 times the one before: 120 ÷ 80 = 1.5, 180 ÷ 120 = 1.5, and so on.
Rate of change on [0, 2]: A is (160 − 100) ÷ 2 = 30 per month. B is (180 − 80) ÷ 2 = 50 per month. On [2, 4]: A is still 30. B is (405 − 180) ÷ 2 = 112.5.
| Month | 0 | 1 | 2 | 3 | 4 |
|---|---|---|---|---|---|
| Plan B balance ($) | 80 | 120 | 180 | 270 | 405 |
| Plan A balance ($) | 100 | 130 | 160 | 190 | 220 |
Plan A's row was worked out from the words.
Example
Which plan has more money at month 2, and by how much?
A: 100 + 30 · 2 = 160. B: 180 from the table. B has $20 more.
A: 100 + 30 · 2 = 160. B: 180 from the table. B has $20 more.
Trap: Plan A is ahead at month 0 and month 1, so it is tempting to say A is better. Keep going: from month 2 on, B is ahead and the gap grows.
Polynomial equation vs. table
p(x) = x³ − 4x is an equation. q is a cubic polynomial given by the table below.
For p: p(0) = 0. Factoring, x(x − 2)(x + 2) = 0 gives zeros at −2, 0 and 2. A cubic with a positive leading coefficient falls on the left and rises on the right.
For q: the y-intercept is the x = 0 row, which is 0. The zeros are the x-values with output 0: −1, 0 and 1. The outputs keep dropping as x grows, and q is a cubic, so q rises on the left and falls on the right.
| x | −3 | −2 | −1 | 0 | 1 | 2 | 3 |
|---|---|---|---|---|---|---|---|
| q(x) | 24 | 6 | 0 | 0 | 0 | −6 | −24 |
Example
Which function has the zero farthest from the origin?
p's zeros are −2, 0, 2, and q's are −1, 0, 1. The farthest is 2 units away for p and 1 unit for q, so p.
p's zeros are −2, 0, 2, and q's are −1, 0, 1. The farthest is 2 units away for p and 1 unit for q, so p.
Trap: A table can't prove end behavior, because it only lists a few x-values. Here it's safe to say q falls on the right because the words tell you q is a cubic and the outputs are heading down.
Which is bigger, and where?
Quadratic vs. exponential for x ≥ 0
From x = 4 on — 2ˣ ≥ x² for x ≥ 4
f(x) = x² is an equation (blue). g is the exponential 2ˣ, given as the table below (orange). Look at x ≥ 0.
To answer "which is bigger," compare row by row. They tie at x = 2 and x = 4. f is bigger only between them, at x = 3. g is bigger before x = 2 and after x = 4.
End behavior: f adds a bit more each step, but g doubles each step. An exponential with a base greater than 1 eventually passes any quadratic, and it stays ahead.
| x | 0 | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|---|
| f(x) = x² | 0 | 1 | 4 | 9 | 16 | 25 | 36 |
| g(x) = 2ˣ | 1 | 2 | 4 | 8 | 16 | 32 | 64 |
Example
How much bigger is g than f at x = 6?
64 − 36 = 28. g is greater by 28.
64 − 36 = 28. g is greater by 28.
Trap: Don't stop at the first x-value you check. At x = 3, f is bigger. If you only looked there you'd say the quadratic wins, and you'd miss that the exponential takes over after x = 4.
Memory hook: Same feature, same units, then compare. Check more than one x before you say who's bigger.
Practice
1. f(x) = 2x + 3 is given by an equation. The graph shows g. (a) Which function has the greater y-intercept? (b) Which has the greater zero? (c) Which function is increasing?
2. f(x) = −x² + 6x − 5 is an equation. g is a quadratic given by the table. Which has the greater maximum? At what x does each reach its maximum?
| x | 0 | 1 | 2 | 3 | 4 |
|---|---|---|---|---|---|
| g(x) | 3 | 6 | 7 | 6 | 3 |
3. p(x) = x³ − x² − 6x is given by an equation. g is the graph of a cubic. Find the zeros of each. Which function has the smallest zero, and which has the largest?
4. Plan A in words: start with $50 and add $20 each month. Plan B is given by the table. Which plan's balance grows faster on average from month 0 to month 3? Give each plan's average rate.
| Month | 0 | 1 | 2 | 3 |
|---|---|---|---|---|
| Plan B ($) | 30 | 60 | 120 | 240 |
5. f(x) = 3 · 2ˣ is an equation. g is described in words: "g is a quadratic function whose graph opens downward." Describe the end behavior of each. For large x, which is greater?
6. f(x) = 10x is an equation. g is the exponential given by the table. At which of the table's x-values is g greater than f? Which grows more as x gets large?
| x | 0 | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|---|
| g(x) | 3 | 6 | 12 | 24 | 48 | 96 |
7. f(x) = 2 sin(2x) + 3 is an equation. The graph shows g. Which function has the greater amplitude? Which has the greater minimum? How many full cycles does each complete on [0, 2π]?
8. g is the graph shown. f is described in words: "f is a linear function whose graph passes through (0, 6) and (3, 0)." Compare their y-intercepts and zeros. On which x-values is f greater than g?