What 2D shape you get when you slice a 3D solid, and what 3D solid you get when you spin a 2D shape around a line.
Cross-sections: slice a solid with a plane
Cube
Slice parallel to a face: a square.
Slice straight down through two opposite edges: a rectangle.
Slice off a corner: a triangle.
Slice through the midpoints of six edges: a regular hexagon.
Cylinder
Slice parallel to the base: a circle the same size as the base.
Slice straight down through the axis: a rectangle.
Slice at a tilt (not through either base): an ellipse.
Cone and pyramid
Slice a cone parallel to its base: a circle, smaller the closer you get to the tip.
Slice a cone straight down through the tip: a triangle.
Slice a square pyramid parallel to its base: a smaller square.
Sphere
Every slice of a sphere is a circle. It's largest when the slice goes through the center (a "great circle").
Solids of rotation: spin a shape around a line
Rectangle about one side → cylinder
The side you spin around becomes the height; the other side becomes the radius.
Right triangle about a leg → cone
The leg on the axis becomes the height; the other leg becomes the radius of the base; the hypotenuse becomes the slant height.
Semicircle about its diameter → sphere
The radius of the semicircle is the radius of the sphere.
Memory hook: Whatever touches the axis stays put; whatever is away from the axis sweeps out a circle.
NC Math 3 · NC.M3.G-GMD.4
Cross-Sections and Solids of Rotation
Practice
Name ____________________ Date ____________
1. A square pyramid is sliced by a plane parallel to its base. What shape is the cross-section?
2. A square pyramid is sliced by a vertical plane that passes through its tip and is parallel to one side of the base. What shape is the cross-section?
3. A right triangle with legs 3 and 4 is rotated around the leg of length 4. Name the solid and find its volume in terms of π.
4. A 2 by 5 rectangle is rotated around its side of length 5. Name the solid and find its volume in terms of π.
5. A cylinder is sliced by a plane parallel to its base. What shape is the cross-section?
6. A semicircle with radius 6 is rotated around its diameter. Name the solid and find its volume in terms of π.
NC Math 3 · NC.M3.G-GMD.4
Cross-Sections and Solids of Rotation
Practice answer key
Name ____________________ Date ____________
1. A square
A slice parallel to the base has the same shape as the base, just smaller — here a smaller square.
2. A triangle (isosceles)
The slice cuts the base along a line and runs up to the tip, so it has three sides: a triangle. It's isosceles because the tip is centered over the base.
3. A cone; 12π
The leg on the axis (4) is the height and the other leg (3) is the radius. V = ⅓ · π · 3² · 4 = 12π.
4. A cylinder; 20π
The side on the axis (5) is the height and the other side (2) is the radius. V = π · 2² · 5 = 20π.
5. A circle
Every slice parallel to the base is a copy of the base — a circle with the same radius.
6. A sphere; 288π
Spinning a semicircle around its diameter sweeps out a sphere with the same radius. V = ⁴⁄₃ · π · 6³ = 288π.
NC Math 3 · NC.M3.G-GMD.4
Cross-Sections and Solids of Rotation
Quiz
Name ____________________ Date ____________
1. A cube has edge length 4. A plane cuts it straight down through two opposite vertical edges, the front-left edge and the back-right edge. What shape is the cross-section, and what is its area?
2. A cone has base radius 10 and height 24. A plane parallel to the base slices the cone 6 above the base. What shape is the cross-section, and what are its radius and area?
3. Spin a right triangle with legs 5 and 12 all the way around the line that contains its shorter leg.
(a) What solid does it sweep out?
(b) How long is the slant height?
(c) What is the volume, in terms of π?
4. An isosceles triangle with base 12 and height 8 is rotated around its line of symmetry (the altitude to the base). Name the solid and find its volume in terms of π.
5. A sphere has radius 13. A plane slices it 5 units from the center. What shape is the cross-section, and what is its area in terms of π?
6. A cylinder has radius 3 and height 10.
(a) A plane slices straight down through its axis. What shape is the cross-section, and what are its dimensions?
(b) What is the area of that cross-section?
(c) A different plane is tilted and cuts across the side without touching either base. What shape is that cross-section?
NC Math 3 · NC.M3.G-GMD.4
Cross-Sections and Solids of Rotation
Quiz answer key
Name ____________________ Date ____________
1. A rectangle, 4 by 4√2 (not a square); area 16√2 ≈ 22.6
The cut runs the full height of the cube, so one side of the rectangle is the edge length, 4. Its other side runs along the diagonal of the square base, from one corner to the opposite corner: 4√2 ≈ 5.66. Since 4 ≠ 4√2, the cross-section is a rectangle, not a square (a square only appears when the slice is parallel to a face). Area = 4 · 4√2 = 16√2 ≈ 22.6.
2. A circle; radius 7.5, area 56.25π (= 225π/4)
A slice parallel to the base of a cone is a circle, smaller than the base. The slice is 6 above the base, so it is 24 − 6 = 18 below the tip. The small cone above the slice is similar to the whole cone, so radius ÷ 10 = 18 ÷ 24, which gives radius = 10 · 0.75 = 7.5. Area = π · 7.5² = 56.25π. Do not use 10 (that is the base) or 10 − 6.
3. (a) A cone (b) 13 (c) 240π
The leg on the axis, 5, becomes the height, and the other leg, 12, sweeps out the circular base, so the radius is 12. The hypotenuse becomes the slant height: √(5² + 12²) = √169 = 13. V = ⅓ · π · 12² · 5 = ⅓ · 720π = 240π. Using 5 as the radius by mistake would give 100π.
4. A cone; 96π
The altitude lies on the axis, so it becomes the height: 8. The base is split in half by the axis, so each half is a radius: 12 ÷ 2 = 6. The two halves of the triangle are mirror images and sweep out the same cone. V = ⅓ · π · 6² · 8 = 96π. Using the full base 12 as the radius would give 384π.
5. A circle with radius 12; area 144π
Every slice of a sphere is a circle. Join the sphere's center to the center of the slice (length 5) and to a point on the edge of the slice (length 13, a radius of the sphere). These form a right triangle with legs 5 and r, where r is the radius of the slice: r = √(13² − 5²) = √144 = 12. Area = π · 12² = 144π. The slice has radius 13 only if it goes through the center.
6. (a) A rectangle, 6 by 10 (b) 60 (c) An ellipse
(a) A slice through the axis is a rectangle. Its height is the cylinder's height, 10, and its width is the full diameter, 2 · 3 = 6, not the radius. (b) Area = 6 · 10 = 60. (c) A tilted slice that stays between the two bases stretches the circle into an ellipse.