| Word | What it means |
|---|---|
| Scale drawing | A drawing of a real thing, made bigger or smaller by the same amount in every direction. |
| Actual size | How big the real thing is. |
| Scale | A rule that tells how drawing lengths match real lengths, like 1 inch : 20 miles. |
| Scale factor | The number you multiply a real length by to get the matching length in the drawing. |
| Corresponding | Matching. Corresponding sides are in the same place on both figures. |
| Proportional | Every drawing side is the same number of times as long as its matching real side. |
| Written as | What it means |
|---|---|
| 1 inch : 20 miles | Every 1 inch on the map stands for 20 real miles. |
| 1 cm : 5 m | Every 1 cm on the drawing stands for 5 real meters. |
| ¼ inch = 1 foot | Every ¼ inch on the plan stands for 1 real foot. |
| Scale factor 1/500 | Every drawing length is 1/500 of the real length. |
| Scale factor 3 | Every drawing length is 3 times the real length. |
| Scale factor | Lengths are multiplied by | Areas are multiplied by |
|---|---|---|
| 2 | 2 | 4 |
| 3 | 3 | 9 |
| 10 | 10 | 100 |
| 1/2 | 1/2 | 1/4 |
| If you need to... | Do this | Watch out for |
|---|---|---|
| Find a real length from a map or plan | Multiply the drawing length by the real amount for 1 drawing unit | Do not divide. The real thing is bigger. |
| Make a drawing of a real thing | Divide each real length by the real amount for 1 drawing unit | Do not multiply. The drawing is smaller. |
| Find a real area | Multiply the drawing area by the scale factor twice | Do not use the scale factor just once. |
| Use a scale like 1 cm : 5 m | Give the answer in the real unit, meters | Do not mix cm and m. Change units first. |
| Check for a scale drawing | Divide each drawing side by its matching side. Is the answer always the same? | Adding the same amount to each side does not work. |
| Find an angle in a drawing | Copy the matching angle from the real figure | Angles never change. |
| Word | What it means |
|---|---|
| Triangle | A closed figure with three straight sides and three angles. |
| Side length | How long one side is. We measure it in units like centimeters (cm). |
| Angle | The opening where two sides meet. We measure it in degrees (°). |
| Between | An angle is between two sides when it sits at the corner where those two sides meet. |
| Unique | Only one. A unique triangle means everyone who builds it gets the same size and shape. |
| Same shape | Two triangles with the same three angles have the same shape. One is a scale drawing of the other. |
| Compass | A tool that draws circles and arcs. You set it to a length. |
| Protractor | A tool that measures and draws angles. |
| Side across from the 30° angle | What the arc does | Triangles |
|---|---|---|
| 3 cm | Stops short of the ray | None |
| 4 cm | Just touches the ray | One |
| 5 cm | Crosses the ray twice | Two |
| 9 cm | Crosses once in front of the corner | One |
| You are given | How many triangles? |
|---|---|
| Three sides (SSS) | One, if the two short sides add to more than the long side. Otherwise none. |
| Two angles and the side between them (ASA) | One, if the two angles add to less than 180°. Otherwise none. |
| Two angles and a side not between them | One, if the two angles add to less than 180°. Otherwise none. |
| Two sides and the angle between them (SAS) | Exactly one. |
| Two sides and an angle not between them (SSA) | None, one, or two. Draw it to find out. |
| Three angles (AAA) | Infinitely many, if they add to 180°. All have the same shape. Otherwise none. |
| If you need to... | Do this | Watch out for |
|---|---|---|
| Check three sides | Add the two shorter sides. The sum must be more than the longest side. | Equal is not enough. The sticks fold flat. |
| Find the third angle | Add the two known angles. Subtract from 180°. | Check that all three add to 180°. |
| Find the range for a third side | Go from big − small to big + small. | The two end numbers are not allowed. |
| Use two sides and the angle between them | There is exactly one triangle. | Make sure the angle is between the sides. |
| Use two sides and an angle not between them | Draw it. You may get none, one, or two. | Do not assume there is only one. |
| Use three angles | They give a shape, not a size. There are infinitely many triangles. | Equal angles do not mean equal triangles. |
| Word | What it means |
|---|---|
| Circle | A round shape. Every point on the edge is the same distance from the center. |
| Center | The point in the middle of the circle. |
| Radius (r) | The distance from the center to the edge. More than one are called radii. |
| Diameter (d) | The distance straight across the circle, through the center. |
| Circumference (C) | The distance around the circle. It is the perimeter of a circle. |
| Area (A) | The amount of flat space inside the circle. We measure it in square units. |
| Pi (π) | A special number, about 3.14. You get it when you divide any circumference by its diameter. |
| In terms of π | An exact answer that keeps the π symbol, like 10π. |
| Circumference | Area | |
|---|---|---|
| What it measures | The distance around | The space inside |
| Formula | C = πd or C = 2πr | A = πr² |
| Units | cm, in, m, ft | cm², in², m², ft² |
| Example | Fence around a garden | Seed to cover the garden |
| If you know | You can find |
|---|---|
| Radius r | d = 2r, then C = 2πr and A = πr² |
| Diameter d | r = d ÷ 2, then C = πd and A = πr² |
| Circumference C | d = C ÷ π, then r = d ÷ 2 |
| Area A | r × r = A ÷ π, then find r |
| If you need to... | Do this | Watch out for |
|---|---|---|
| Use r or d | Check which one you were given. Cut d in half to get r. | Putting d into πr². |
| Find the circumference | Use C = πd or C = 2πr. | Do not use C = πr. That leaves out a 2. |
| Find the area | Find r × r first. Then multiply by π. | r² is r × r, not r × 2. |
| Write units | Use cm, in, or m for distances. Use cm², in², or m² for area. | Do not mix them up. |
| Give an answer | Keep π for an exact answer. Use ≈ 3.14 for a decimal. | Do not write = for a rounded number. |
| Work with half and quarter circles | Take ½ or ¼ of the area. For the edge, add the straight sides. | Forgetting the straight sides. |
| Word | What it means |
|---|---|
| Angle | Two rays that start at the same point. We measure an angle in degrees (°). |
| Vertex | The point where the two rays of an angle meet. |
| Right angle | An angle of exactly 90°. It looks like the corner of a book. A small square marks it. |
| Straight angle | An angle of exactly 180°. It looks like a straight line. |
| Adjacent angles | Two angles that share a vertex and one side. They do not overlap. |
| Complementary angles | Two angles whose measures add up to 90°. |
| Supplementary angles | Two angles whose measures add up to 180°. |
| Vertical angles | The angles across from each other when two lines cross. |
| Unknown angle | An angle you do not know yet. A letter like x stands for its measure. |
| Equation | A math sentence with an equal sign, like x + 40 = 90. |
| Pair | What you know | Equation idea |
|---|---|---|
| Complementary | They make a right angle. | angle + angle = 90 |
| Supplementary | They make a straight line. | angle + angle = 180 |
| Adjacent | They make one bigger angle together. | part + part = whole |
| Vertical | They are across from each other and equal. | angle = angle |
| If you need to... | Do this | Watch out for |
|---|---|---|
| Find a complement | Subtract the angle from 90 | Do not use 180. |
| Find a supplement | Subtract the angle from 180 | Do not use 90. |
| Find the angle across a crossing | Copy it. Vertical angles are equal. | Vertical angles do not add to 180. |
| Find the angle next to another on a crossing | Subtract from 180 | Next-door neighbors are supplementary. |
| Write an equation from a picture | Add the angles and set the sum to 90 or 180 | Put parentheses around an expression like (x + 20). |
| Finish a problem | Put x back in and check each angle | The answer is the angle, not always x. |
| Word | What it means |
|---|---|
| Perimeter | The distance around a flat shape. You add up all the side lengths. |
| Area | The amount of flat space inside a shape. It is measured in square units, like cm². |
| Composite figure | A shape made by joining simpler shapes, like rectangles and triangles. |
| Base and height | A base is a side you pick. The height is the straight distance from the base to the opposite side or point. It makes a right angle with the base. |
| Prism | A solid with two matching ends and flat rectangle sides. A box is a prism. |
| Pyramid | A solid with a flat base and triangle sides that meet at one point on top. |
| Volume | The amount of space inside a solid. It is measured in cubic units, like cm³. |
| Surface area | The total area of all the outside faces of a solid. It is measured in square units. |
| Face | One flat side of a solid. |
| Net | A flat pattern that folds up into a solid. It shows every face. |
| Slant height | The height of a pyramid's triangle face, measured along the face. It is not the height of the pyramid. |
| If you need to... | Do this | Watch out for |
|---|---|---|
| Find the area of a composite figure | Split it into rectangles and triangles, or subtract a missing piece. Then add or subtract. | Find every missing length first. |
| Find the perimeter of a composite figure | Add only the sides on the outside | Do not count dashed lines inside. Use slanted sides, not heights. |
| Find the volume of a prism | Multiply the base area by the height of the prism | The height is the distance between the two ends. |
| Find the volume of a pyramid | Multiply ⅓ by the base area by the height | Use the height, not the slant height. |
| Find a surface area | Add the area of every face. Use a net to see them all. | Do not forget faces. Matching faces count twice. |
| Join two solids | Add the volumes. For surface area, leave out the faces that touch. | Faces that touch are hidden inside. |