NC.7.G.1Print or save as PDF
Scale Drawings
A map of your town fits on one page. The real town is much bigger. A map is a scale drawing. In this guide you will learn what stays the same when a figure gets bigger or smaller. You will use a scale to find real lengths and real areas. Then you will make a scale drawing of your own.
Source: Authored for NCMath (not from the PDF prototype) — needs teacher review
What is a scale drawing?
Words to know
Maps, floor plans, and model cars are all scale drawings. Each one shows a real thing at a different size. Here are the words you will see in this guide.
| Word | What it means |
|---|---|
| Scale drawing | A drawing of a real thing, made bigger or smaller by the same amount in every direction. |
| Actual size | How big the real thing is. |
| Scale | A rule that tells how drawing lengths match real lengths, like 1 inch : 20 miles. |
| Scale factor | The number you multiply a real length by to get the matching length in the drawing. |
| Corresponding | Matching. Corresponding sides are in the same place on both figures. |
| Proportional | Every drawing side is the same number of times as long as its matching real side. |
A map has a scale factor smaller than 1, because the drawing is smaller than the real thing. An enlarged photo has a scale factor bigger than 1.
Angles stay the same
Zoom in on a photo on your phone. The picture gets bigger. The corners do not change shape.
A scale drawing works the same way. Every angle is exactly as big as the matching angle in the real figure.
Only the lengths change. Here the scale factor is 2, so every side is 2 times as long. The sides 3 cm, 4 cm, and 5 cm become 6 cm, 8 cm, and 10 cm.
The angles are about 37° and 53°, plus a right angle of 90°. They are the same in both triangles. The little arcs and squares mark the matching angles.
Example
A triangle has angles of 90°, 37°, and 53°. You make a scale drawing with scale factor 3. What are the angles in the drawing?
Angles do not change in a scale drawing. The drawing's angles are 90°, 37°, and 53°. Check: 90 + 37 + 53 = 180, and the angles of a triangle always add to 180°.
Angles do not change in a scale drawing. The drawing's angles are 90°, 37°, and 53°. Check: 90 + 37 + 53 = 180, and the angles of a triangle always add to 180°.
Trap: A common mistake is thinking the angles get bigger when the drawing gets bigger. They do not. Only the side lengths change. A tiny triangle and a giant triangle with the same shape have the same angles.
Sides are in proportion
Compare each drawing side to its matching side on the original. In a scale drawing, you get the same number every time. That number is the scale factor.
Drawing 1 is 4 cm by 6 cm. Drawing 2 is 4 cm by 5 cm. The original is 2 cm by 3 cm. Which one is a true scale drawing?
Example
Is Drawing 1 (4 cm by 6 cm) a scale drawing of the 2 cm by 3 cm rectangle? What about Drawing 2 (4 cm by 5 cm)?
Drawing 1: 4 ÷ 2 = 2 and 6 ÷ 3 = 2. Both answers are 2. So Drawing 1 is a scale drawing, and the scale factor is 2. Drawing 2: 4 ÷ 2 = 2, but 5 ÷ 3 is about 1.7. The numbers are different. So Drawing 2 is not a scale drawing. It looks stretched. Check: all four corners of all three rectangles are 90°. Equal angles alone do not prove a scale drawing. The sides must be proportional too.
Drawing 1: 4 ÷ 2 = 2 and 6 ÷ 3 = 2. Both answers are 2. So Drawing 1 is a scale drawing, and the scale factor is 2. Drawing 2: 4 ÷ 2 = 2, but 5 ÷ 3 is about 1.7. The numbers are different. So Drawing 2 is not a scale drawing. It looks stretched. Check: all four corners of all three rectangles are 90°. Equal angles alone do not prove a scale drawing. The sides must be proportional too.
Trap: A common mistake is adding the same amount to each side. Going from 2 cm by 3 cm to 4 cm by 5 cm adds 2 cm to both sides. That is not a scale drawing. To scale a figure, you multiply, not add.
Using the scale to find actual lengths
Ways to write a scale
Scales are written in a few styles. They all tell you the same kind of thing: how the drawing matches real life.
| Written as | What it means |
|---|---|
| 1 inch : 20 miles | Every 1 inch on the map stands for 20 real miles. |
| 1 cm : 5 m | Every 1 cm on the drawing stands for 5 real meters. |
| ¼ inch = 1 foot | Every ¼ inch on the plan stands for 1 real foot. |
| Scale factor 1/500 | Every drawing length is 1/500 of the real length. |
| Scale factor 3 | Every drawing length is 3 times the real length. |
Reading a map
From drawing to real life Multiply by the real amount that 1 drawing unit stands for. — map distance × miles per inch = real distance
Look at the scale bar on this map. It shows that 1 inch on the map stands for 20 miles.
Two towns are 3.5 inches apart on the map. You want the real distance.
Each inch stands for 20 miles. So you multiply the map distance by 20.
Example
Oakton and Pine Ridge are 3.5 inches apart on a map. The scale is 1 inch : 20 miles. How far apart are the real towns?
3.5 × 20 = 70. The towns are 70 miles apart. Check: the real towns are bigger than the map picture, so the answer should be bigger than 3.5. It is, and the unit is miles.
3.5 × 20 = 70. The towns are 70 miles apart. Check: the real towns are bigger than the map picture, so the answer should be bigger than 3.5. It is, and the unit is miles.
Trap: A common mistake is flipping the scale. Dividing 3.5 by 20 gives 0.175, which is smaller than the map distance. A real town is bigger than its picture on a map. If your answer comes out smaller than the drawing, you probably divided when you should have multiplied.
Scales like 1 cm : 5 m
A drawing of a garden uses the scale 1 cm : 5 m. On the drawing, the garden is 7 cm long.
The double number line shows seven steps. Each step is 1 cm on the drawing and 5 m in real life.
So you multiply 7 by 5. The answer is in the real unit, meters.
Example
A garden is 7 cm long on a drawing. The scale is 1 cm : 5 m. How long is the real garden?
7 × 5 = 35. The garden is 35 m long. Check: the answer is in meters, not centimeters, and 35 is bigger than 7.
7 × 5 = 35. The garden is 35 m long. Check: the answer is in meters, not centimeters, and 35 is bigger than 7.
Trap: A common mistake is mixing units. The answer 35 is in meters, because the real side of the scale is in meters. If a problem needs a different unit, change the units first. Then multiply.
Turning a scale into a scale factor
A scale factor is a plain number with no units. To find it, write both sides of the scale in the same unit.
Take the scale 1 cm : 5 m. One meter is 100 cm, so 5 m is 500 cm. The scale is 1 cm : 500 cm.
Every drawing length is 1/500 of the real length. So every real length is 500 times the drawing length.
Example
A drawing uses the scale 1 cm : 5 m. Write it as a scale factor. Then use it on a drawing length of 7 cm.
5 m = 500 cm, so the scale is 1 cm : 500 cm. The scale factor is 1/500. Real length: 7 × 500 = 3,500 cm. Check: 3,500 cm = 35 m. This matches the answer from the double number line.
5 m = 500 cm, so the scale is 1 cm : 500 cm. The scale factor is 1/500. Real length: 7 × 500 = 3,500 cm. Check: 3,500 cm = 35 m. This matches the answer from the double number line.
Floor plans and fractions
A builder draws a floor plan with the scale ¼ inch = 1 foot.
How many quarter inches fit in 1 inch? Four. So 1 inch on the plan stands for 4 feet.
On the plan, the bedroom is 3 inches by 2.5 inches. The kitchen is 2 inches wide.
Example
On a plan, the bedroom is 3 inches by 2.5 inches. The scale is ¼ inch = 1 foot. What is the real size of the bedroom?
1 inch on the plan stands for 4 feet. 3 × 4 = 12 and 2.5 × 4 = 10. The bedroom is 12 ft by 10 ft. Check: the real numbers are bigger than the plan numbers, and the unit is feet.
1 inch on the plan stands for 4 feet. 3 × 4 = 12 and 2.5 × 4 = 10. The bedroom is 12 ft by 10 ft. Check: the real numbers are bigger than the plan numbers, and the unit is feet.
Finding actual areas
Area uses the scale factor twice
Areas and the scale factor Lengths use the scale factor once. Areas use it twice, which means you multiply by the scale factor times itself. — area factor = scale factor × scale factor
Think of tiles. A 2 cm by 3 cm rectangle has an area of 6 square centimeters.
Now use scale factor 2. Both sides double, so you get a 4 cm by 6 cm rectangle.
Count how many small rectangles fit inside the big one. Four fit. The area is 24 cm², which is 4 times as much.
Area is length times width. Both lengths get multiplied by 2. So the area gets multiplied by 2 × 2 = 4.
| Scale factor | Lengths are multiplied by | Areas are multiplied by |
|---|---|---|
| 2 | 2 | 4 |
| 3 | 3 | 9 |
| 10 | 10 | 100 |
| 1/2 | 1/2 | 1/4 |
Example
A sticker is 2 cm by 5 cm. A poster copy of it uses scale factor 3. What is the area of the poster copy?
The sticker's area is 2 × 5 = 10 square centimeters. The area factor is 3 × 3 = 9. The poster's area is 10 × 9 = 90 square centimeters. Check: the poster's sides are 6 cm and 15 cm, and 6 × 15 = 90.
The sticker's area is 2 × 5 = 10 square centimeters. The area factor is 3 × 3 = 9. The poster's area is 10 × 9 = 90 square centimeters. Check: the poster's sides are 6 cm and 15 cm, and 6 × 15 = 90.
Trap: A common mistake is multiplying the area by the scale factor just once. With scale factor 2, the area is not 2 times as big. It is 4 times as big.
Areas on a map
A park is 3 inches by 2 inches on a map. The scale is 1 inch : 10 miles.
One inch is 10 miles. So one square inch on the map is 10 miles by 10 miles. That is 100 square miles.
The map has 6 squares. Each one stands for 100 square miles.
Example
A park is 3 in by 2 in on a map. The scale is 1 in : 10 mi. What is the actual area of the park?
Method 1: find the real sides first. 3 × 10 = 30 mi and 2 × 10 = 20 mi. Area = 30 × 20 = 600 square miles. Method 2: the map area is 3 × 2 = 6 square inches. Each square inch stands for 10 × 10 = 100 square miles. 6 × 100 = 600 square miles. Both methods match. Check: the real area is much bigger than 6, and the unit is square miles.
Method 1: find the real sides first. 3 × 10 = 30 mi and 2 × 10 = 20 mi. Area = 30 × 20 = 600 square miles. Method 2: the map area is 3 × 2 = 6 square inches. Each square inch stands for 10 × 10 = 100 square miles. 6 × 100 = 600 square miles. Both methods match. Check: the real area is much bigger than 6, and the unit is square miles.
Trap: A common mistake is multiplying the map area by 10 instead of 100. That gives 60 square miles. You must use the 10 twice, because area has two lengths in it.
Making your own scale drawing
Shrinking a real thing
- Pick a scale that makes the drawing fit your paper.
- Write each real length in the unit the scale uses.
- Divide each real length by the real amount that 1 drawing unit stands for.
- Draw each side that long. Keep the corners the same as the real shape.
- Write the scale on your drawing.
Example
A garden is 12 m long and 8 m wide. Make a scale drawing on grid paper. Let 1 square stand for 2 m.
Length: 12 ÷ 2 = 6 squares. Width: 8 ÷ 2 = 4 squares. Draw a rectangle 6 squares long and 4 squares wide. Check: 6 × 2 = 12 m and 4 × 2 = 8 m. The corners are square, like a real garden.
Length: 12 ÷ 2 = 6 squares. Width: 8 ÷ 2 = 4 squares. Draw a rectangle 6 squares long and 4 squares wide. Check: 6 × 2 = 12 m and 4 × 2 = 8 m. The corners are square, like a real garden.
Trap: A common mistake is multiplying when you make a drawing. 12 × 2 = 24 squares would not fit on the page. When you draw something big on a small page, you divide.
Enlarging a drawing
Sometimes you want a bigger copy, like a poster made from a small sketch.
Pick a corner to start from. Count how far across and how far up each point is. Multiply both counts by the scale factor.
Here the scale factor is 2. The house is 4 cm wide and 5 cm tall. The copy is 8 cm wide and 10 cm tall. The marked angles match.
Example
A right triangle on grid paper is 5 squares wide and 3 squares tall. Enlarge it with scale factor 2. How big is the new triangle?
5 × 2 = 10 squares wide. 3 × 2 = 6 squares tall. The new triangle is 10 squares wide and 6 squares tall. Check: the right angle is still 90°, and both lengths doubled.
5 × 2 = 10 squares wide. 3 × 2 = 6 squares tall. The new triangle is 10 squares wide and 6 squares tall. Check: the right angle is still 90°, and both lengths doubled.
Quick guide to common mistakes
| If you need to... | Do this | Watch out for |
|---|---|---|
| Find a real length from a map or plan | Multiply the drawing length by the real amount for 1 drawing unit | Do not divide. The real thing is bigger. |
| Make a drawing of a real thing | Divide each real length by the real amount for 1 drawing unit | Do not multiply. The drawing is smaller. |
| Find a real area | Multiply the drawing area by the scale factor twice | Do not use the scale factor just once. |
| Use a scale like 1 cm : 5 m | Give the answer in the real unit, meters | Do not mix cm and m. Change units first. |
| Check for a scale drawing | Divide each drawing side by its matching side. Is the answer always the same? | Adding the same amount to each side does not work. |
| Find an angle in a drawing | Copy the matching angle from the real figure | Angles never change. |
Use this table as a last check before you hand in your work.
Memory hook: Lengths use the scale factor once. Areas use it twice. Angles never use it.
Practice
1. A triangle has angles of 50°, 60°, and 70°. You make a scale drawing with sides twice as long. What are the three angles in the drawing?
2. Anna prints a copy of a 4 in by 6 in photo. The copy is 10 in by 12 in. Is the copy a scale drawing of the photo? Explain.
3. A map uses the scale 1 inch : 15 miles. Maple Creek and Riverton are 4 inches apart on the map.
(a) How many real miles apart are the towns?
(b) A road trip is 105 miles long. How many inches long would it be on the map?
4. A drawing of a playground uses the scale 1 cm : 4 m.
(a) The swing set is 3 cm long on the drawing. How long is the real swing set?
(b) The real sandbox is 6 m wide. How wide is it on the drawing?
5. A company makes a model truck with scale factor 1/24. Every length on the model is 1/24 of the real length. The model truck is 8 inches long.
(a) How long is the real truck in inches?
(b) How long is the real truck in feet?
6. A floor plan uses the scale ½ inch = 1 foot. The bedroom is 6 inches by 4 inches on the plan.
(a) What is the real size of the bedroom?
(b) A desk is 5 feet long. How long should it be drawn on the plan?
7. Mia enlarges a 3 in by 5 in photo with a scale factor of 4.
(a) What are the sides of the enlarged photo?
(b) How many times as big is the area of the enlarged photo? What is the new area?
8. A town park is drawn on grid paper with the scale 1 cm : 6 m. Each square is 1 cm. On the drawing, the park is 5 cm by 4 cm. A square playground inside it is 2 cm by 2 cm.
(a) Find the real length and width of the park.
(b) Find the real area of the park.
(c) Find the real area of the playground.
(d) The town makes a new drawing with the scale 1 cm : 10 m. How big is the park on the new drawing?